PanoTools:
Re: Relative Paths in PtGui Batch
Erik Krause 2005-Sep-16 17:56:19
On 16 Sep 2005 at 15:36, Joost Nieuwenhuijse wrote:
> And now I really stop adding new features to 5.0, it's time to release!
> Bug reports are still welcome, though.
PTGui optimizer still gives very different results to pano12
optimizer. In a case I get a "very good" (average distance 3, maximum
63 pixels) from pano12 and a "very bad" (average 873, maximum 4133)
from PTGui - although PTGui itself found the control points and
aligned the images more or less ok.
In this case PTGui optimizer set lens correction parameters to 0.0
and changed yaw of image 0 to a completely different value, although
this was unchecked for optimizing. I'll send you the project file...
One thing that could be considered a bug: If I load an older project,
the options that where not present then stay with the PTGui defaults.
Should be set to PTStitcher a.s.o. in my opinion...
best regards
--
Erik Krause
Resources, not only for panorama creation:
http://www.erik-krause.de/
Read panotools at GMane:
http://news.gmane.org/gmane.comp.graphics.panotools
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/.Cr1lB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/PanoTools/
<*> To unsubscribe from this group, send an email to:
#removed#
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/